5053-02 / 002
Speed 14,000 Cycles/Min (28,000 strokes/min),
Operating Pressure 160 PSI Running, Stroke 1/10 in.
Converted to 100 psi
5053-10 micro 100
Speed 14,000 Cycles/Min (28,000 strokes/min),
Operating Pressure 100 PSI Running, Stroke 1/10 in.
5053-07 Micro
Speed 22,000 Cycles/Min (44,000 strokes/min),
Operating Pressure 160 PSI Running
Also available converted 100 psi
5053-12 Micro 100
Speed 22,000 Cycles/Min (44,000 strokes/min), Operating Pressure 100 PSI Running
5058-01 Surgairtome Two
Speed 90,000 RPM Nominal, Operating Pressure 100 PSI Running, Torque 1.75
in. oz.
5053-09 Micro 100
Speed 500 - 20,000 RPM, Operating Pressure 100 PSI Running, Torque 6 in. oz.
Minimum
1387-01 Hall II Air Drill
Speed 90,000 - 11,000 RPM, Operating Pressure
90 - 110 PSI Running
5053-13 Wire Driver
ONLY: $1,800.00
Speed 1100 RPM,
Converted to Operating Pressure
100 PSI Running
Designed for insertion and removal of plain and threaded wires from 0.028
in. to 0.062 in.
(0.71mm to 1.60mm) diameter
5053-11 Micro 100 Sagittal Saw
Speed 18,000 Cycles/Min
(36,000 strokes/min), Operating
Pressure 100 PSI Running
$1,500.00
$1,800.00
$1,500.00
$1,800.00
$1,800.00
$1,500.00
$1,500.00
$1,800.00
Hall Zimmer Micro Systems
