<

Helping Medical professionals practice state of the art medicine affordably. Since 1983

Basic Fragment Sets

Thank you for your interest in our Synthes® or Syntec Scientific product offerings. We provide this disclosure statement to address the concerns of Synthes® and to make sure that we do not confuse or mislead you, our loyal customers.

Our prices are 50% - 75% lower than Synthes® because we are liquidators.

Synthes® is the registered trademark of Synthes®.

Whittemore is not an authorized agent for Synthes®.

Whittemore does not warrant Synthes® products. Please contact Synthes with respect to its warranty policies.

Synthes® does not permit commingling of its products.

 

Syntec Scientific Product

Syntec Scientific Corporation uses product numbering that in some instances is similar to the product numbering used by Synthes®

Syntec Scientific products are only compatible with Syntec Scientific products.  Syntec Scientific products are not made to the same specifications as Synthes® products, are not identical to Synthes® products, and should not be used in combination with any Synthes® products.

Syntec Scientific Corporation was founded in 1995, and is FDA registered, CE, ISO and GMP certified. 

  • USA / FDA certified – FDA registration # 9616944
  • Medical device listing # 13040406
  • 510K  #K983495
  • CE MARK/ MDD certified
  • ISO 9001,13485 certified
  • GMP certified
  • EN460001 certified

Grid List

Set Descending Direction

1 Item(s)

  1. Basic Instrument Only
    Used

    BASIC INSTRUMENT ONLY
    STARTER SET FOR 4.5MM AND 6.5MM SCREWS

    2 - S310310 - 3.2MM DRILL BIT FOR QC
    2 - S310440 - 4.5MM DRILL BIT FOR QC
    1 - S310960 - 4.5MM COUNTERSINK FOR CORTEX SCREWS
    1 - S311440 - T-HANDLE WITH QUICK COUPLING
    1 - S311460 - 4.5MM TAP FOR CORTEX SCREWS
    1 - S311660 - 6.5MM TAP FOR CANCELLOUS SCREW
    1 - S312480 - 4.5/3.2MM DOUBLE DRILL SLEEVE
    1 - S312670 - 6.5/3.2MM DOUBLE DRILL SLEEVE
    1 - S314270 - LARGE HEXAGONAL SCREWDRIVER
    1 - S319100 - 4.5MM - 6.5MM DEPTH GAUGE
    1 - S321160 - 11MM COMBINATION WRENCH
    1 - S322440 - 4.5/4.5 MM DRILL GUIDE FOR COMPRESSION PLATES
    1 - S329920 - BENDING TEMPLATE LENGTH 210MM
    1 - S329970 - BENDING TEMPLATE LENGTH 120MM
    1 - S329990 - BENDING TEMPLATE LENGTH 155MM
    1 - 301010 - RED CASE
    1 - 302250 - LARGE BASE INSERT TRAY
    1 - 302260 - SMALL INSERT TRAY

    Learn More

Grid List

Set Descending Direction

1 Item(s)