Plating Instruments
Thank you for your interest in our Synthes® or Syntec Scientific product offerings. We provide this disclosure statement to address the concerns of Synthes® and to make sure that we do not confuse or mislead you, our loyal customers.
Our prices are 50% - 75% lower than Synthes® because we are liquidators.
Synthes® is the registered trademark of Synthes®.
Whittemore is not an authorized agent for Synthes®.
Whittemore does not warrant Synthes® products. Please contact Synthes with respect to its warranty policies.
Synthes® does not permit commingling of its products.
Syntec Scientific Product
Syntec Scientific Corporation uses product numbering that in some instances is similar to the product numbering used by Synthes®
Syntec Scientific products are only compatible with Syntec Scientific products. Syntec Scientific products are not made to the same specifications as Synthes® products, are not identical to Synthes® products, and should not be used in combination with any Synthes® products.
Syntec Scientific Corporation was founded in 1995, and is FDA registered, CE, ISO and GMP certified.
- USA / FDA certified – FDA registration # 9616944
- Medical device listing # 13040406
- 510K #K983495
- CE MARK/ MDD certified
- ISO 9001,13485 certified
- GMP certified
- EN460001 certified
-
UsedSYNTHES 7.0MM CANNULATED HEX
SCREWDRIVER SHAFT
(SCREWDRIVER SHAFT FOR 7.0MM
CANNULATED SCREWS)
Learn More -
UsedSYNTHES CANNULATED 3.5MM HEXAGONAL
SCREWDRIVER FOR 7.0 MM CANNULATED
SCREWS
(HOLDING SLEEVE IS 314.11)
Learn More -
UsedSYNTHES 4.5-7.0MM HEX SCREWDRIVER
SHAFT
(FOR LARGE SCREWS, AND REMOVAL
OF 4.5MM AND 7.0MM CANNULATED
SCREWS AND 4.9MM LOCKING BOLTS)
Learn More -
Used -
Used -
Used -
Used -
Used -
UsedSYNTHES 2.7MM/1.25MM DOUBLE DRILL SLEEVE
Learn More -
Used -
Used -
Used -
Used -
Used -
Used -
Used -
Used -
Used -
UsedSYNTHES 6-POSITION DRILL GUIDE HANDLE
Learn More -
Used
You have no items to compare.
You have no items in your quote.
