Plating Instruments
Thank you for your interest in our Synthes® or Syntec Scientific product offerings. We provide this disclosure statement to address the concerns of Synthes® and to make sure that we do not confuse or mislead you, our loyal customers.
Our prices are 50% - 75% lower than Synthes® because we are liquidators.
Synthes® is the registered trademark of Synthes®.
Whittemore is not an authorized agent for Synthes®.
Whittemore does not warrant Synthes® products. Please contact Synthes with respect to its warranty policies.
Synthes® does not permit commingling of its products.
Syntec Scientific Product
Syntec Scientific Corporation uses product numbering that in some instances is similar to the product numbering used by Synthes®
Syntec Scientific products are only compatible with Syntec Scientific products. Syntec Scientific products are not made to the same specifications as Synthes® products, are not identical to Synthes® products, and should not be used in combination with any Synthes® products.
Syntec Scientific Corporation was founded in 1995, and is FDA registered, CE, ISO and GMP certified.
- USA / FDA certified – FDA registration # 9616944
- Medical device listing # 13040406
- 510K #K983495
- CE MARK/ MDD certified
- ISO 9001,13485 certified
- GMP certified
- EN460001 certified
-
New3.2MM DRILL BIT FOR QUICK COUPLING
3.2MM DIAMETER
OVERALL LENGTH 145MM.
WORKING LENGTH 120MM
FLUTE LENGTH 50MM
Learn More -
New3.5MM DRILL BIT FOR QUICK COUPLING
3.5MM DIAMETER
OVERALL LENGTH 110MM
85MM WORKING LENGTH
FLUTE LENGTH 50MM
(SMALL SET)
Learn More -
New4.5MM DRILL BIT FOR QUICK COUPLING
4.5MM DIAMETER
OVERALL LENGTH 145MM
120MM WORKING LENGTH
50MM FLUTE LENGTH
Learn More -
New1.5/2.0MM COUNTERSINK SHAFT
FOR MINI SCREWS
2 1/4 (57MM)
1.1MM TIP
MINI QUICK COUPLING END
(MINI SET)
Learn More -
New1.1MM DRILL BIT FOR QUICK COUPLING
1.1MM DIAMETER
OVERALL LENGTH 60MM
WORKING LENGTH 35MM
FLUTE LENGTH 20MM
(MINI SET)
Learn More -
New3.5MM COUNTERSINK SHAFT
FOR 2.7MM AND 3.5MM CORTEX AND 4.0MM
CANCELLOUS BONE SCREWS
(SMALL SET)
Learn More -
New -
New -
New4.5/3.2MM DOUBLE DRILL GUIDE
3.2MM AND 4.5MM DRILL BITS,
4.5MM TAP FOR CORTEX SCREWS,
4.5MM TAP FOR MALLEOLAR SCREWS
(LARGE SET)
Learn More -
New6.5/3.2MM DOUBLE DRILL GUIDE
FOR 3.2MM DRILL BITS AND TAPS FOR
6.5MM CANCELLOUS SCREWS
(LARGE SET)
Learn More -
New2.5MM SMALL HEX SCREWDRIVER WITH HOLDING SLEEVE
Learn More
FOR 2.7, 3.5 & 4.0MM SCREWS
(MINI AND SMALL SET) -
New2.5MM HEX SCREWDRIVER SHAFT FOR 2.7, 3.5 & 4.0MM SCREWS
Learn More
4in LONG
(MINI AND SMALL SET) -
New -
New3.5MM LARGE HEX SCREWDRIVER SHAFT FOR 4.5MM AND 6.5MM SCREWS
Learn More -
New3.5MM LARGE HEXAGONAL SCREWDRIVER WITH SLEEVE, FOR 4.5MM AND 6.5MM SCREWS
Learn More -
Used -
New1.5MM MINI SCREWDRIVER SHAFT, HEXAGONAL, QUICK COUPLING
Learn More
WORKS WITHOUT SLEEVE
(MINI SET) -
New1.5MM MINI HEX SCREWDRIVER SHAFT WITH SLEEVE
Learn More
MINI QUICK COUPLING
(MINI SET) -
New -
New3.5/2.5MM INSERT DRILL SLEEVE
FOR 2.5MM DRILL BITS
AND FOR LONG 3.5MM LAG SCREWS
(SMALL SET)
Learn More
