Small Fragment Sets
Thank you for your interest in our Synthes® or Syntec Scientific product offerings. We provide this disclosure statement to address the concerns of Synthes® and to make sure that we do not confuse or mislead you, our loyal customers.
Our prices are 50% - 75% lower than Synthes® because we are liquidators.
Synthes® is the registered trademark of Synthes®.
Whittemore is not an authorized agent for Synthes®.
Whittemore does not warrant Synthes® products. Please contact Synthes with respect to its warranty policies.
Synthes® does not permit commingling of its products.
Syntec Scientific Product
Syntec Scientific Corporation uses product numbering that in some instances is similar to the product numbering used by Synthes®
Syntec Scientific products are only compatible with Syntec Scientific products. Syntec Scientific products are not made to the same specifications as Synthes® products, are not identical to Synthes® products, and should not be used in combination with any Synthes® products.
Syntec Scientific Corporation was founded in 1995, and is FDA registered, CE, ISO and GMP certified.
- USA / FDA certified – FDA registration # 9616944
- Medical device listing # 13040406
- 510K #K983495
- CE MARK/ MDD certified
- ISO 9001,13485 certified
- GMP certified
- EN460001 certified
-
NewNew Whittemore Titanium Locking Small Fragment Set
(FULL SET NOT SHOWN IN PICTURE)
Holds - FOR TPLO PLATES
2.0 mm Titanium Locking Screws
2.4 mm Titanium Locking Screws
Includes:
2.7mm Titanium Locking Screws, Self-Tapping with Star Recessed Head
4ea: 18mm , 20mm, 22mm, 24mm, 26mm, and 28mm3.5mm Titanium Locking Screws, Self-Tapping with Star Recessed Head
4ea: 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm, 34mm, 36mm, 38mm, 40mm, 44mm and 48mmScrew Rack For 2.7mm & 3.5mm Screws
2.7mm Titanium Locking Plates
2ea: 5, 7, 9, and 11-Hole Plates3.5mm Titanium Locking Plates
2 ea: 5, 7, 9, and 11-Hole PlatesLocking Instruments
2.5mm Drill Bit, QC
2.7mm Drill Bit, QC
2.7mm Threaded Drill Guide
3.5mm Threaded Drill Guide
Stardrive Screwdriver T15 for 3.5mm Screws, With Holding Sleeve
Stardrive Screwdriver T8 for 2.4mm & 2.7mm Screws, With Holding Sleeve
2ea. 3.5mm Locking Inserts
2ea. 2.7mm Locking InsertsSterilization Cases Included
Learn More -
NewNew Whittemore Titanium Locking Mini Fragment Set
(FULL SET NOT SHOWN IN PICTURE)
Includes:
2.0mm Titanium Locking Screws, Self-Tapping with Star Recessed Head
4ea: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, and 20mm.
2.4mm Titanium Locking Screws, Self-Tapping with Star Recessed Head
4ea: 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, and 20mm.
Screw Rack For 2.0mm & 2.4mm Screws
(Pictures Are For Reference Only)
2.0mm Titanium Locking Plates
2ea: 5, 7, and 9-Hole Plates
2.4mm Titanium Locking Plates
2ea: 5, 7, and 9-Hole PlatesLocking Instruments
Learn More
1.5mm Drill Bit, QC
2.0mm Drill Bit, QC
2.0mm Threaded Drill Guide
2.4mm Threaded Drill Guide
Stardrive Screwdriver T6 for 2.0mm Screws, With Holding Sleeve
Stardrive Screwdriver T8 for 2.4mm & 2.7mm Screws, With Holding Sleeve
2ea. 2.0mm Locking Inserts
2ea. 2.4mm Locking Inserts
Sterilization Cases Included -
NewNew Whittemore Titanium Locking TPLO Plate Set
Includes:
2- 2.0mm Titanium Locking TPLO Plates (1 each Left , Right)
2- 2.4mm Titanium Locking TPLO Plates (1 each Left , Right)
2- 2.7mm Titanium Locking TPLO Plates (1 each Left , Right)
2- 3.5mm Titanium Locking TPLO Plates (1 each Left , Right)Sterilization Case
Learn More -
NewINTRODUCING: A Brand New Line of Affordable Instrument Sets!!
$1,500.00
(New) Small Fragment 3.5-4.0mm Instrument Set
Includes:
1 - Drill Bit, 3.2mm
1 - Drill Bit, 2.5mm
1 - Drill Bit Stopper, 3.2mm
1 - Drill Bit Stopper, 2.5mm
1 - Quick Slip Extractor, 2.5mm
1 - Trephine, 4.0mm
2 - Lockplate Screw Drill Sleeve, 3.2mm
2 - Lockplate Screw Drill Sleeve, 1.5mm
1 - Quick Lock Tap, 4.0mm
1 - Quick Tap, 3.5
1 - Quick Hexagon Screwdriver Shaft
1 - DCP Guide, 2.5mm
1 - Drill Guide, 3.0-4.0mm
1 - T-Handle
1 - Hexagon Wrench, 2.5mm
1 - Torque Handle, 1.5nm
2 - Thread Guide Needle, 1.5mm
1 - Periosteal Stripper, 6mm
1 - Lockplate Pull Drill, 3.2mm
1 - Depth Gauge, 60mm
1 - Straight Handle
1 - Screw Rack
1 - Sterilization Case
Overall Dimensions: 16.25in L x 8.25in W x 3.5in HScrew case Holds.
10ea.3.5MM X 12MM -48MM CORTEX SCREW
30 Screws 2ea. 4.0MM X 12MM – 40MM CANCELLOUS SCREW
14 Screws 1ea. 4.0MM X 12MM-14MM CANCELLOUS PARTIALLY THREADED
Fill With Whittemore Swiss Type Screws for $1,800.00
Learn More
These sets are NOT made in Pakistan
High quality and an excellent alternative to the high cost of Swiss and German instrument sets
We can modify any set to meet your needs specifically such as adding Swiss or German components
Fill with our FDA Approved Screws
Add trays for plates and additional instruments -
NewWHITTEMORE SWISS-TYPE BASIC SMALL PLATE SET, CONTAINING: ONE-THIRD TUBULAR PLATES: 1 - 2 HOLE 1 - 3-HOLE 2 - 4-HOLE 2 - 5-HOLE 2 - 6-HOLE 1 - 7-HOLE 1 - 8-HOLE 3.5MM NARROW DCP PLATES: 2 - 6-HOLE 2 - 7-HOLE 2 - 8-HOLE 2 - 10-HOLE IN A 4 X 6.5 INCH PLASTIC STERILIZATION CASE Learn More -
NewWHITTEMORE SMALL FRAGMENT SET IN A
Learn More
USED GRAPHIC CASE SOME INSTRUMENTS USED
SWISS TYPE
CONTAINS:
3.5MM SELF TAPPING CORTEX SCREWS
8 EACH 10MM,12MM,14MM,
16MM,18MM,20MM,22MM,24MM
26MM,28MM,32MM,36MM,40MM
6 EACH:45MM,50MM
4.0MM CANCELLOUS SCREWS
6 EACH: 14MM,16MM,18MM,20MM,
22MM,24MM,26MM,28MM,32MM,
36MM,40MM,45MM,50MM,
4 EACH:55MM,60MM
4.0MM CANCELLOUS PARTIALLY THREADED
6 EACH: 12MM,14MM,16MM,18MM,20MM,
22MM,24MM,26MM,28MM,30MM,35MM,
40MM,45MM,50MM
WASHER:
6 EACH: 7.0/3.9MM
INSTRUMENTS
3 - S310250 2.5MM DRILL BIT QUICK COUPLING
2 - S310350 3.5MM DRILL BIT FOR QUICK COUPLING
1 - S310890 3.5MM COUNTERSINK SHAFT
2 - S311320 3.5MM TAP FOR CORTEX SCREWS
2 - S311340 4.0MM TAP FOR CANCELLOUS SCREWS
1 - S311430 QUICK COUPLING HANDLE
1 - S312300 3.5/2.5MM INSERT DRILL SLEEVE
1 - S314020 2.5MM HEX SCREWDRIVER W/SLEEVE
1 - S314030 2.5MM HEX SCREWDRIVER SHAFT
1 - S319010 2.7MM - 4.0MM DEPTH GAUGE
1 - S319390 SHARP HOOK
1 - S319970 SELF-HOLDING SCREW FORCEPS
1 - S398800 BONE HOLDING FORCEP
2 - S399180 6MM HOHMANN RETRACTOR
1 - S399190 8MM HOHMANN RETRACTOR
1 - S399490 15MM HOHMANN RETRACTOR
1 - S399360 PERIOSTEAL ELEVATOR, 6MM
1 - S399970 REDUCTION FORCEPS WITH POINTS
1 - S399990 REDUCTION FORCEPS
1 - 305400 CASE -
NewWHITTEMORE SWISS TYPE SMALL FRAGMENT SET
Learn More
IN A NEW GRAPHIC CASE
CONTAINS:
3.5MM CORTEX SCREWS
8 EACH 10MM,12MM,14MM,
16MM,18MM,20MM,22MM,24MM
26MM,28MM,32MM,36MM,40MM
6 EACH:45MM,50MM
4.0MM CANCELLOUS SCREWS
6 EACH: 14MM,16MM,18MM,20MM,
22MM,24MM,26MM,28MM,32MM,
36MM,40MM,45MM,50MM,
4 EACH:55MM,60MM
4.0MM CANCELLOUS PARTIALLY THREADED
6 EACH: 12MM,14MM,16MM,18MM,20MM,
22MM,24MM,26MM,28MM,30MM,35MM,
40MM,45MM,50MM
WASHER:
6 EACH: 7.0/3.9MM
3.5MM PLATES:
1 EACH: 3 HOLES, 4 HOLES,T PLATE RIGHT
1 EACH: 3 HOLES, 5 HOLES OBLIQUE T PLATE
ONE-THIRD TUBULAR PLATE
1 EACH: 2 HOLE, 3 HOLE, 7 HOLE, 8 HOLE
2 EACH: 4 HOLE, 5 HOLE, 6 HOLE
CLOVELEAF PLATE
1 EACH: 3 HOLE, 4 HOLE
3.5MM DYNAMIC COMPRESSION PLATES
2 EACH: 6 HOLE, 7 HOLE, 8 HOLE, 10 HOLE
INSTRUMENTS
3 - S310250 2.5MM DRILL BIT QUICK COUPLING
2 - S310350 3.5MM DRILL BIT FOR QUICK COUPLING
1 - S310890 3.5MM COUNTERSINK SHAFT
2 - S311320 3.5MM TAP FOR CORTEX SCREWS
2 - S311340 4.0MM TAP FOR CANCELLOUS SCREWS
1 - S311430 QUICK COUPLING HANDLE
1 - S312200 2.0MM TRIPLE DRILL SLEEVE
1 - S312280 3.5/2.5MM DOUBLE DRILL SLEEVE
1 - S312300 3.5/2.5MM INSERT DRILL SLEEVE
1 - S314020 2.5MM HEX SCREWDRIVER W/SLEEVE
1 - S314030 2.5MM HEX SCREWDRIVER SHAFT
1 - S319010 2.7MM - 4.0MM DEPTH GAUGE
1 - S319390 SHARP HOOK
1 - S319970 SELF-HOLDING SCREW FORCEPS
1 - S322320 3.5MM COMPRESSION DRILL GUIDE
1 - S329040 2.7MM & 3.5MM BENDING IRONS
1 - S329050 2.7MM & 3.5MM BENDING IRONS
1 - S329870 BENDING TEMPLATES FOR 3.5MM PLATES
1 - S329890 BENDING TEMPLATES FOR 3.5MM
1 - S398800 BONE HOLDING FORCEP
2 - S399180 6MM HOHMANN RETRACTOR
1 - S399190 8MM HOHMANN RETRACTOR
1 - S399490 15MM HOHMANN RETRACTOR
1 - S399360 PERIOSTEAL ELEVATOR, 6MM
1 - S399970 REDUCTION FORCEPS WITH POINTS
1 - S399990 REDUCTION FORCEPS
1 - 305400 CASE -
NewWHITTEMORE SWISS TYPE SMALL FRAGMENT SET
Learn More
IN A RED CASE
CONTAINS :
3.5MM CORTEX SCREWS
4 EACH 10MM and 12MM
8 EACH 14MM,16MM,18MM
4 EACH 20MM,22MM, 24MM,26MM,
28MM,32MM,36MM,40MM
4.0MM CANCELLOUS SCREWS
2 EACH 12MM,14MM,16MM,18MM,20MM,
22MM,24MM,26MM,28MM,30MM
35MM, 40MM,45MM,50MM,55MM
60MM
4.0MM CANCELLOUS PARTIALLY THREADED
2 EACH 12MM,14MM,16MM,18MM,20MM,
22MM,24MM,26MM,28MM,30MM,
35MM,40MM,45MM,50MM
WASHER
4 EACH 7.0/3.9MM
PLATES
2 EACH: 3.5MM X 6 HOLE DYNAMIC COMPRESSION PLATE
3.5MM X 7 HOLES DYNAMIC COMPRESSION PLATE
3.5MM X 8 HOLES DYNAMIC COMPRESSION PLATE
3.5MM X 10 HOLES DYNAMIC COMPRESSION PLATE
INSTRUMENTS
1 - S399990 REDUCTION FORCEPS
1 - S310250 2.5MM DRILL BIT FOR QUICK COUPLING
1 - S310350 3.5MM DRILL BIT FOR QUICK COUPLING
1 - S310890 3.5MM COUNTERSINK SHAFT
1 - S311320 3.5MM TAP FOR CORTEX SCREWS
1 - S311340 4.0MM TAP FOR CANCELLOUS SCREWS
1 - S311430 QUICK COUPLING HANDLE
1 - S312200 2.0MM TRIPLE DRILL SLEEVE
1 - S312280 3.5/2.5MM DOUBLE DRILL SLEEVE
1 - S312300 3.5/2.5MM INSERT DRILL SLEEVE
1 - S314020 HEXAGONAL SCREWDRIVER
1 - S314030 1.5 & 2.0MM SMALL GAUGE HANDLE
1 - S319010 2.7MM - 4.0MM DEPTH GAUGE
1 - S319390 SHARP HOOK
1 - S319970 SELF-HOLDING SCREW FORCEPS
1 - S322320 3.5MM COMPRESSION DRILL GUIDE
1 - S329040 2.7MM & 3.5MM BENDING IRONS
1 - S329050 2.7MM & 3.5MM BENDING IRONS
1 - S329870 BENDING TEMPLATES FOR 3.5MM PLATES
1 - S329890 BENDING TEMPLATES FOR 3.5MM PLATES
1 - S398800 BONE HOLDING FORCEPS
1 - S399180 SMALL RETRACTOR, 6MM WIDE
1 - S399190 SMALL RETRACTOR, 8MM WIDE
1 - S399360 PEROSTEAL ELEVATOR, LENGTH 200MM
1 - S399490 RETRACTOR, 15MM WIDE
1 - S399970 REDUCTION FORCEPS WITH POINTS
1 - 301010 ALUMINUM RED CASE
1 - 302250 TRAY FOR SMALL IMPLANT AND MINI
1 - 302260 TRAY FOR MINI IMPLANT AND INST.
1 - 302270 TRAY FOR MINI-SHORT INSTRUMENT
1 - 302450 TRAY FOR SMALL SCREWS -
NewSmall Fragment Instruments Only
Learn More
Starter Set In A Red Case
2 - S310250 - 2.5mm Drill Bit For Qc
2 - S310350 - 3.5mm Drill Bit Of Qc
2 - S310190 - 2.0mm Drill Bit For QC
1 - S310890 - 3.5mm Countersink
2 - S311320 - 3.5mm Tap For Cortex
Screws
2 - S311340 - 4.0mm Tap For Cancellous
Screws
1 - S311430 - Qc Handle
1 - S312280 - 3.5/2.5mm Double Drill
Sleeve
1 - S312300 - 3.5/2.5mm Insert Drill
Sleeve
1 - S314020 - 2.5mm Hex Screwdriver
With Sleeve
1 - S319010 - 2.7mm-4.0mm Depth Gauge
1 - S322320 - 3.5mm Compression Drill
Guide
1 - S329040 - Bending Iron For 2.7mm
And 3.5mm Plates
1 - S329050 - Bending Iron For 2.7mm
And 3.5mm Plates
1 - S329870 - Bending Template
1 - S329890 - Bending Template
1 - S398800 - Bone Holding Forceps,
Self-Centering
2 - S399180 - Hohmann Retractor, 6mm
1 - S399360 - Periosteal Elevator, 6mm
2 - S399490 - Hohmann Retractor, 15mm
1 - S399970 - Reduction Forceps With Points
1 - S399990 -Reduction Forceps With Teeth -
UsedBASIC INSTRUMENT ONLY
Learn More
STARTER SET FOR 4.5MM AND 6.5MM SCREWS
2 - S310310 - 3.2MM DRILL BIT FOR QC
2 - S310440 - 4.5MM DRILL BIT FOR QC
1 - S310960 - 4.5MM COUNTERSINK FOR CORTEX SCREWS
1 - S311440 - T-HANDLE WITH QUICK COUPLING
1 - S311460 - 4.5MM TAP FOR CORTEX SCREWS
1 - S311660 - 6.5MM TAP FOR CANCELLOUS SCREW
1 - S312480 - 4.5/3.2MM DOUBLE DRILL SLEEVE
1 - S312670 - 6.5/3.2MM DOUBLE DRILL SLEEVE
1 - S314270 - LARGE HEXAGONAL SCREWDRIVER
1 - S319100 - 4.5MM - 6.5MM DEPTH GAUGE
1 - S321160 - 11MM COMBINATION WRENCH
1 - S322440 - 4.5/4.5 MM DRILL GUIDE FOR COMPRESSION PLATES
1 - S329920 - BENDING TEMPLATE LENGTH 210MM
1 - S329970 - BENDING TEMPLATE LENGTH 120MM
1 - S329990 - BENDING TEMPLATE LENGTH 155MM
1 - 301010 - RED CASE
1 - 302250 - LARGE BASE INSERT TRAY
1 - 302260 - SMALL INSERT TRAY -
NewWHITTEMORE SWISS TYPE BASIC 4.5MM, 6.5MM
Learn More
SCREW SET
CONTAINS:
4.5MM CORTEX SCREWS
7 - 214014 4.5MM x 14MM
8 - 214016 4.5MM x 16MM
8 - 214018 4.5MM x 18MM
8 - 214020 4.5MM x 20MM
8 - 214022 4.5MM x 22MM
8 - 214024 4.5MM x 24MM
8 - 214026 4.5MM x 26MM
8 - 214028 4.5MM x 28MM
16 - 214030 4.5MM x 30MM
12 - 214032 4.5MM x 32MM
12 - 214034 4.5MM x 34MM
12 - 214036 4.5MM x 36MM
12 - 214038 4.5MM x 38MM
12 - 214040 4.5MM x 40MM
6 - 214042 4.5MM x 42MM
12 - 214044 4.5MM x 44MM
6 - 214046 4.5MM x 46MM
6 - 214048 4.5MM x 48MM
6 - 214052 4.5MM x 52MM
6 - 214056 4.5MM x 56MM
5 - 214060 4.5MM x 60MM
6.5MM CANCELLOUS BONE SCREWS,
16MM THREAD LENGTH
2 - 216030 6.5MM x 30MM
2 - 216035 6.5MM x 35MM
2 - 216040 6.5MM x 40MM
2 - 216045 6.5MM x 45MM
2 - 216050 6.5MM x 50MM
2 - 216055 6.5MM x 55MM
2 - 216060 6.5MM x 60MM
6.5mm CANCELLOUS BONE SCREWS,
32mm THREAD LENGTH
4 - 217045 6.5MM x 45MM
4 - 217050 6.5MM x 50MM
4 - 217055 6.5MM x 55MM
4 - 217060 6.5MM x 60MM
4.5mm MALLEOLAR SCREWS
2 - 215025 4.5MM x 25MM / 12MM THREAD
2 - 215030 4.5MM x 30MM / 15MM THREAD
2 - 215035 4.5MM x 35MM / 18MM THREAD
2 - 215040 4.5MM x 40MM / 20MM THREAD
2 - 215045 4.5MM x 45MM / 22MM THREAD
2 - 215050 4.5MM x 50MM / 24MM THREAD
2 - 215055 4.5MM x 55MM / 26MM THREAD
2 - 215060 4.5MM x 60MM / 28MM THREAD
INSTRUMENTS:
1 - 319970 SELF-HOLDING SCREW FORCEPS
1 - 302140 TRAY FOR BASIC 4.5, 6.5 SCREWS
1 - 301010 ALUMINUM RED CASE
