3m Mini Driver Systems

3M Mini K113 Hudson Chuck Attachment
-  Chuck insert is connected to a stainless steel arbor and accepts those intruments which have a Hudson connector end
-  Quick release allows for rapid insertion and removal of Hudson accessories
-  Through Cannulation: 4.0mm (0.156in)

3M Mini K112 Trinkle Chuck Attachment
-  Chuck insert is connected to a stainless steel arbor and accepts 3M Trinkle twist drills
-  Designed to drive drill bits, automatic screwdrivers and other accesories with Trinkle fittings
-  Quick release allows for rapid insertion and removal of Trinkle accessories
-  Through Cannulation: 4.0mm (0.156in)

5 Assorted Blades For 3M K120 Sagittal Saw
-  Selection of Blades May Vary
-  Fits 3M Mini Driver K120 Attachment
(Attachment Shown In Photo Not Included) 

3M Mini K120 Sagittal Saw Insert Attachment
-  Made of stainless steel and has a sealed housing that never needs internal lubrication
-  The blade can be located in five positions and is secured by eight pins and a center locking button
-  Accepts only K120 and K130 series blades into push button blade holder (no tools needed)
-  Can be locked into the handpiece in four possible positions
-  Blade Oscillation (Minimum): 13,500 cycles
-  Blade Oscillation (Nominal): 14,500 cycles
-  Long Blade Excursion Arc: 0.21in (5.4mm)
-  Short Blade Excursion Arc: 0.13in (3.2mm)

3M Mini K114 ASIF/AO Chuck Insert Attachment
-  Chuck insert is connected to a stainless still arbor and accepts all Synthes ASIF/AO twist drills, bone taps and screwdrivers
-  Quick release allows for rapid insertion and removal of ASIF/AO accessories
-  Through Cannulation: 3.2mm (0.125in)

3M Mini K110 5/32in Small Jacobs Chuck Attachment
-  Designed to drive straight plain shank twist drill bits, pins, and wires
-  Conneced to a stainless steel arbor with an internal cannulation diameter of 4.2mm (0.166in)
-  Jaw Cannulation: 0-4.0mm (0-0.156in)
-  Through Cannulation: 4.0mm (0.156in)
-  Requires 5/32in (K0M) Jacobs Chuck Key

3M Mini K109 1/4in Large Jacobs Chuck Attachment
-  Designed to drive straight shank twist drill bits, pins and wires
-  Jaw Cannulation: 0-6.35mm (0-0.25in)
-  Through Cannulation: 4.0mm (0.156in)
-  Requires 1/4in (K1M) Jacobs Chuck Key

3M Mini K111/K111A Automatic Wire Driver Attachment
-  Quick release chuck lever allows K-wire insertion, removal and advancement without the use of additional keys and accesories
-  Insert is connected to a stainless steel arbor with an internal cannulation diameter of 0.065in
-  Adjustable nosepiece with line indicators in increments 0.028in, 0.035in, 0.045in, 0.062in and 0.071in
-  Variable Speed: 0-1,100rpm
-  Through Cannulation: 0.028in - 0.071in

3M K100 Mini-Driver Handpiece
-  Pneumatic
-  Vane Motor (Variable Speed)
-  360° Swivel Hose Connector
-  Trigger Throttle With Safety Slide
-  Operating Speed (Forward & Reverse): 0-1,100rpm
-  Stall Torque: 110in-oz (776n-mm) (Nominal)
-  Nitrogen Consumption: 5.0scfm (Nominal)
-  Normal Operating Pressure: 90-110psi
-  Weight: 17.8oz (504g)
-  Length: 5.75in (145mm)
-  Material: Anodized Aluminum & Stainless Steel

3M Mini II K210 1/4in  High Torque Jacobs Chuck Attachment
-  Designed to drive large (6mm-14mm) cannulated drill bits and pins
-  Jaw Cannulation: 0-6.35mm (0-0.25in)
-  Through Cannulation: 2.4mm (0.094in)
-  Stall Torque: 2.8 N-m (25in-lb)
-  Variable Speed: 0-250rpm
-  Requires 1/4in (K1M) Jacobs Chuck Key

3M Mini II K211 Automatic Pin Driver Attachment
-  Designed to drive pins (wires) and drill bits
-  Quick release chuck lever allows insertion, removal and advancement without the use of additional keys and accesories
-  Adjustable nosepiece for wires 1.6-4.0mm in diameter
-  Variable Speed: 0-1,100rpm
-  Through Cannulation: 0.062in - 0.156in

5 Assorted Blades For 3M K220 Sagittal Saw
-  Selection of Blades May Vary
-  Fits 3M Mini Driver II K220 Attachment
(Attachment Shown In Photo Not Included)

3M Mini II K201 Wrench
For Use With The K220 Sagittal Saw

3M K200 Mini-Driver II Handpiece
-  Pneumatic
-  Vane Motor
-  360° Swivel Hose Connector
-  Trigger Throttle With Safety Slide
-  Variable Speed: 0-1,100rpm
-  Stall Torque: 110in-oz (776n-mm) (Nominal)
-  Nitrogen Consumption: 5.0scfm (Nominal)
-  Normal Operating Pressure: 90-110psi
-  Weight: 19.7oz (560g)
-  Length: 6.25in (159mm)
-  Material: Anodized Aluminum & Stainless Steel

3M Mini Hose, 10ft (Used)
-  Quick disconnect coaxial hose for use with 3M Mini-Driver handpieces

(New) WE 3M Mini Hose, 10 ft
-  Quick disconnect coaxial hose for use with 3M Mini-Driver handpieces

3M Mini Hose, 10 ft (Certified)
-  Completely rebuilt to like new condition according to manufacturer's specifications
-  Quick disconnect coaxial hose for use with 3M Mini-Driver handpieces

3M K100 Mini-Driver Build-A-Set (Used)

*** Customize this set to fit your needs! Choose from the available items below and more! Don't see what you need or have any questions? Contact us today for a personalized quote! ***

The 3M Mini-Driver Pneumatic Instrument System, combined with the many available attachments, is intended for sawing, reaming, drilling, wiring and pinning small bones or joints and connective tissue during orthopedic surgery

K100 Series Components:
-  Mini-Driver Handpiece (K100)
-  1/4 Jacobs Chuck Attachment With Key (K109)
-  5/32 Jacobs Chuck Attachment With Key (K110)
-  Automatic Wire Driver Attachment (K111)
-  Trinkle Chuck Attachment (K112)
-  Hudson Chuck Attachment (K113)
-  ASIF/AO Synthes Quick Release Attachment (K114)
-  Sagittal Saw Insert Attachment (K120)
-  Mini Air Hose, 10ft

Specifications:
-  Vane Motor (Variable Speed)
-  360° Swivel Hose Connector
-  Trigger Throttle With Safety Slide
-  Operating Speed (Forward & Reverse): 0-1,100rpm
-  Stall Torque: 110in-oz (776n-mm) (Nominal)
-  Nitrogen Consumption: 5.0scfm (Nominal)
-  Normal Operating Pressure: 90-110psi
-  Weight: 17.8oz (504g)
-  Length: 5.75in (145mm)
-  Material: Anodized Aluminum & Stainless Steel

*** Customize this set to fit your needs! Choose from the available items below and more! Don't see what you need or have any questions? Contact us today for a personalized quote! ***