Hall - Zimmer Micro 100
-
UsedHALL 5053-13 WIREDRIVER 100
- OPERATING SPEED: 0 TO 1,100 rpm
- OUTPUT TORQUE: 30 in.-oz.
- CANNULATED: ACCEPTS WIRES FROM
0.028in (0.71mm) TO 0.062in (1.57mm)
Learn More -
UsedHALL 5053-12 MICRO 100 OSCILLATING SAW
- OPERATING SPEED:
22,000 CYCLES/MIN (44,000 STROKES/MIN)
- STROKE: 7°
Learn More -
Used
Hall 5053-10 Micro 100 Reciprocating Saw
Learn More
- Operating Speed: 14,000 cycles/min (28,000 strokes/min)
- Stroke: 1/10in (2.54mm)
- Long continuous cuts make this saw deal for many of the deep-access osteotomies in oral and maxillofacial surgery
- Specially designed blades assure quick cutting
- Hand-tightened collet nut easily secures blades
- Specialized rasps available for shaping, contouring, and preparing intramedullary canals of small bones
- Crosscut and straight cut rasps for hand, foot, and other small bone procedures including: joint arthroscopy, contouring bone, and extremity surgery -
UsedHALL 5053-09 MICRO 100 DRILL
- OPERATING SPEED: 500 TO 20,000 rpm
- OUTPUT TORQUE: 6in. -oz.
- BUR PULL-OUT FORCE: EXCEEDS 12 lbs. (5.45kg)
Learn More -
UsedHALL 5053-07 MICRO OSCILLATING SAW
- OPERATING SPEED:
22,000 CYCLES/MIN
44,000 STROKES/MIN
- OPERATING PRESSURE: 100 PSI
Learn More -
Used
Hall 5053-04 Wiredriver
Learn More
- Pneumatic Handpiece
- Operating Speed: 1100 rpm
- Operating Pressure: 100 psi -
Used
WHITTEMORE MICRO HIGH SPEED DRILL
Learn More
PLATINUM SERIES (REBUILT)
90,000 RPM SPEED
1.75 IN.-OZ TORQUE
90-110 PSI PRESSURE
6.5 CFM MAX CONSUMPTION
NITROGEN POWERED -
Used
Hall 5053-01 Micro Drill
Learn More
Model: 5053-01/5053-001
- Operating Speed: 500rpm - 20,000rpm
- Operating Pressure: 160 PSI
- For bone cutting and reshaping procedures in orthopaedic, podiatric, oral and plastic & reconstructive surgery
- Accepts the full range of Hall attachments and burs
- Twist-lock collet mechanism for simple insertion and removal of burs and attachments
- Torque of 6in-oz allows the drill to cut dense cortical bone without significant slowdown or stalling -
UsedHALL MICRO 100 SET: 5-PIECE SET
1 - HALL 5053-13 WIREDRIVER 100
0-1100 RPM, 30 IN, OZ TORQUE,
10 RUNNING CANNULATE TO 0.062 IN
1 - HALL 5053-09 MICRO 100 DRILL
100 PSI
SPEED 500-20,000 RPM,
LENGTH 6 INCHES,
DIAMETER .7 INCHES
6 INCHES OZ TORQUE,
1 - HALL 5053-12 MICRO 100 OSCILLATING SAW
LENGTH 7.5 IN. AND WEIGHT 7.62
OPERATING PRESSURE: 100 PSI RUNNING
SPEED 22,000 CYCLES/MIN. (44,000 STROKES/ MIN)
1 - HALL 5053-10 MICRO 100 RECIPROCATING SAW
OPERATING PRESSURE: 100 PSI RUNNING
SPEED: 22,000 CYCLE/MIN. (44,000 STROKES/MIN)
1 - HALL 5058-01 SURGAIRTOME II AIR DRILL
SPEED 90,000 RPM NOMINAL
TORQUE: 1.75 IN OZ. NOMINAL
OPERATING PRESSURE:90-110 PSI RUNNING
ALSO AVAILABLE INDIVIDUALLY
Learn More -
New
WHITTEMORE PLATINUM SERIES MICRO HIGH SPEED DRILL
Learn More
90,000 RPM SPEED
1.75 IN.-OZ TORQUE
90-110 PSI PRESSURE
6.5 CFM MAX CONSUMPTION
NITROGEN POWERED