Orthopedic Power Equipment
-
Used
(Used) 3M Maxi Hose, 10ft
Learn More
- For use with 3M Maxi Driver handpieces -
Used
-
Used
-
Used
-
Used3M K500 MINI-DRIVER HANDPIECE - ELECTRIC
Learn More -
Used
3M Mini K113 Hudson Chuck Attachment
Learn More
- Chuck insert is connected to a stainless steel arbor and accepts those intruments which have a Hudson connector end
- Quick release allows for rapid insertion and removal of Hudson accessories
- Through Cannulation: 4.0mm (0.156in) -
Used
3M Mini K112 Trinkle Chuck Attachment
Learn More
- Chuck insert is connected to a stainless steel arbor and accepts 3M Trinkle twist drills
- Designed to drive drill bits, automatic screwdrivers and other accesories with Trinkle fittings
- Quick release allows for rapid insertion and removal of Trinkle accessories
- Through Cannulation: 4.0mm (0.156in) -
Used
3M Mini K120 Sagittal Saw Insert Attachment
Learn More
- Made of stainless steel and has a sealed housing that never needs internal lubrication
- The blade can be located in five positions and is secured by eight pins and a center locking button
- Accepts only K120 and K130 series blades into push button blade holder (no tools needed)
- Can be locked into the handpiece in four possible positions
- Blade Oscillation (Minimum): 13,500 cycles
- Blade Oscillation (Nominal): 14,500 cycles
- Long Blade Excursion Arc: 0.21in (5.4mm)
- Short Blade Excursion Arc: 0.13in (3.2mm) -
Used
3M Mini K114 ASIF/AO Chuck Insert Attachment
Learn More
- Chuck insert is connected to a stainless still arbor and accepts all Synthes ASIF/AO twist drills, bone taps and screwdrivers
- Quick release allows for rapid insertion and removal of ASIF/AO accessories
- Through Cannulation: 3.2mm (0.125in) -
Used
3M Mini K110 5/32in Small Jacobs Chuck Attachment
Learn More
- Designed to drive straight plain shank twist drill bits, pins, and wires
- Conneced to a stainless steel arbor with an internal cannulation diameter of 4.2mm (0.166in)
- Jaw Cannulation: 0-4.0mm (0-0.156in)
- Through Cannulation: 4.0mm (0.156in)
- Requires 5/32in (K0M) Jacobs Chuck Key -
Used
3M Mini K109 1/4in Large Jacobs Chuck Attachment
Learn More
- Designed to drive straight shank twist drill bits, pins and wires
- Jaw Cannulation: 0-6.35mm (0-0.25in)
- Through Cannulation: 4.0mm (0.156in)
- Requires 1/4in (K1M) Jacobs Chuck Key -
Used
3M Mini K111/K111A Automatic Wire Driver Attachment
Learn More
- Quick release chuck lever allows K-wire insertion, removal and advancement without the use of additional keys and accesories
- Insert is connected to a stainless steel arbor with an internal cannulation diameter of 0.065in
- Adjustable nosepiece with line indicators in increments 0.028in, 0.035in, 0.045in, 0.062in and 0.071in
- Variable Speed: 0-1,100rpm
- Through Cannulation: 0.028in - 0.071in -
Used
3M K100 Mini-Driver Handpiece
Learn More
- Pneumatic
- Vane Motor (Variable Speed)
- 360° Swivel Hose Connector
- Trigger Throttle With Safety Slide
- Operating Speed (Forward & Reverse): 0-1,100rpm
- Stall Torque: 110in-oz (776n-mm) (Nominal)
- Nitrogen Consumption: 5.0scfm (Nominal)
- Normal Operating Pressure: 90-110psi
- Weight: 17.8oz (504g)
- Length: 5.75in (145mm)
- Material: Anodized Aluminum & Stainless Steel -
Used
3M Mini II K210 1/4in High Torque Jacobs Chuck Attachment
Learn More
- Designed to drive large (6mm-14mm) cannulated drill bits and pins
- Jaw Cannulation: 0-6.35mm (0-0.25in)
- Through Cannulation: 2.4mm (0.094in)
- Stall Torque: 2.8 N-m (25in-lb)
- Variable Speed: 0-250rpm
- Requires 1/4in (K1M) Jacobs Chuck Key -
Used
3M Mini II K211 Automatic Pin Driver Attachment
Learn More
- Designed to drive pins (wires) and drill bits
- Quick release chuck lever allows insertion, removal and advancement without the use of additional keys and accesories
- Adjustable nosepiece for wires 1.6-4.0mm in diameter
- Variable Speed: 0-1,100rpm
- Through Cannulation: 0.062in - 0.156in -
Used
3M Mini II K201 Wrench
Learn More
For Use With The K220 Sagittal Saw -
Used
3M K200 Mini-Driver II Handpiece
Learn More
- Pneumatic
- Vane Motor
- 360° Swivel Hose Connector
- Trigger Throttle With Safety Slide
- Variable Speed: 0-1,100rpm
- Stall Torque: 110in-oz (776n-mm) (Nominal)
- Nitrogen Consumption: 5.0scfm (Nominal)
- Normal Operating Pressure: 90-110psi
- Weight: 19.7oz (560g)
- Length: 6.25in (159mm)
- Material: Anodized Aluminum & Stainless Steel -
Used
3M Mini Hose, 10ft (Used)
Learn More
- Quick disconnect coaxial hose for use with 3M Mini-Driver handpieces -
Used
3M K200 Mini-Driver II Handpiece (REBUILT)
Learn More
- Pneumatic
- Vane Motor
- 360° Swivel Hose Connector
- Trigger Throttle With Safety Slide
- Variable Speed: 0-1,100rpm
- Stall Torque: 110in-oz (776n-mm) (Nominal)
- Nitrogen Consumption: 5.0scfm (Nominal)
- Normal Operating Pressure: 90-110psi
- Weight: 19.7oz (560g)
- Length: 6.25in (159mm)
- Material: Anodized Aluminum & Stainless Steel -
Used
3M Maxi L100 Driver II Set
Learn More
Includes:
- L100 Driver Handpiece
- L110 Jacobs Chuck
- (K0M) 5/32" Jacobs Key
- L150 Reaming Drive Insert
- L296 Holding Handle
- L320A Oscillating Saw