Products
-
Used
-
Used
HALL 1375-23 CLOWARD EXTRA-LONG BUR GUARD
Learn More
3.7 IN. (9.4CM) IN OVERALL LENGTH.
DESIGNED FOR DEEP INCISIONS.
MARKED FROM 1-5CM IN 1 CM INCREMENTS FOR GAUGING DEPTHS.
USES 5093 SERIES EXTRA LONG BURS.
FOR USE WITH HALL 5053-009 MICRO 100 DRILL. -
Used
HALL1375-12 MEDIUM BUR GUARD
Learn More
1.8IN. (4.57CM) IN OVERALL LENGTH.
ALLOWS MEDIUM BURS TO BE STABILIZED IN ORTHOPEDIC, ORAL, PLASTIC, PODIATRIC AND RECONSTRUCTIVE SURGERY.
USES 5091 SERIES MEDIUM-LENGTH BURS EXCEPT 5091-080, 5091-081, 5091-082, 5091-083. -
Used
HALL 1375-11 LONG BUR GUARD
Learn More
OVERALL LENGTH: 3.4in (8.64cm)
ALLOWS LONG BURS TO BE STABILIZED IN ORTHOPEDIC AND ORAL SURGICAL PROCEDURES.
USE ONLY 5092 SERIES LONG BURS. -
UsedHALL 5020-061 MICROCHOICE LONG BUR GUARD
- STAINLESS STEEL
- USE WITH 5092 SERIES BURS
- FOR USE WITH 5020-025 AND 5020-021
HANDPIECES
Learn More -
UsedHALL 5020-060 MICROCHOICE MEDIUM BUR GUARD
- STAINLESS STEEL
- USE WITH 5092 SERIES BURS
- FOR USE WITH 5020-025 AND 5020-021
HANDPIECES
Learn More -
Used
(5020-053) LINVATEC HALL SURGICAL FOOT SWITCH.
Learn More
FOR MICROCHOICE MC5020 CONSOLE -
UsedHALL 5059-05 STERNUM SAW SET
INCLUDES:
- HALL STERNUM SAW (5059-05)
- HALL STERNUM GUARD (5059-06)
- HALL STERNUM GUARD WRENCH (5059-07)
- PNEUMATIC
- FAST, SAFE CUTTING OF STERNUM
- NOMINAL SPEED: 17,000 CYCLES PER MIN
- CUTTING STROKE: 0.125 INCH
- OPERATING PRESSURE: 100PSI
*** SOLD AS A SET ONLY ***
Learn More -
Used
Hall 5053-10 Micro 100 Reciprocating Saw
Learn More
- Operating Speed: 14,000 cycles/min (28,000 strokes/min)
- Stroke: 1/10in (2.54mm)
- Long continuous cuts make this saw deal for many of the deep-access osteotomies in oral and maxillofacial surgery
- Specially designed blades assure quick cutting
- Hand-tightened collet nut easily secures blades
- Specialized rasps available for shaping, contouring, and preparing intramedullary canals of small bones
- Crosscut and straight cut rasps for hand, foot, and other small bone procedures including: joint arthroscopy, contouring bone, and extremity surgery -
Used
Hall 5053-01 Micro Drill
Learn More
Model: 5053-01/5053-001
- Operating Speed: 500rpm - 20,000rpm
- Operating Pressure: 160 PSI
- For bone cutting and reshaping procedures in orthopaedic, podiatric, oral and plastic & reconstructive surgery
- Accepts the full range of Hall attachments and burs
- Twist-lock collet mechanism for simple insertion and removal of burs and attachments
- Torque of 6in-oz allows the drill to cut dense cortical bone without significant slowdown or stalling -
UsedHall 5058-01 SURGAIRTOME Two High Speed Drill
*Rebuilt From New & Used Parts To Manufacturer's Specifications*
- Operating Speed: 90,000rpm Maximum
- Operating Pressure: 90-110 PSI
- Torque: 1.75in-oz
- Optimum efficiency for cutting and sculpting of bone or enamel in oral, podiatric, orthopaedic,
neuro, and plastic & reconstructive surgery
- Improves the critical spped/torque ratio enabling the user to cut faster with more power than previous turbine drills
- Lubrication free for low maintenance and less need for repairs
- Special BurGuard interlock system that prevents the drill from operating without a bur guard attached
- 30° angled swivel hose connector to help balance the drill and keep the hose out of the way
- Also works with a line of attachments that add versatility to the system
Learn More